If you are in the market for a new water heater, you may be wondering what the installation process is like. Gas water heaters have always been popular, and many people are choosing to install them. In this blog post, we will outline the steps involved in how to replace a gas hot water heater. Let’s get started!
Is DIY Gas Water Heater Installation Dangerous?
We will be transparent with you: yes, it is. With that said, let’s outline the steps involved in how to install a gas water heater safely:
Shut Off the Gas to the Old Water Heater
Before beginning any work on your water heater, be sure to turn off the gas supply at the main valve. This will ensure that there is no chance of igniting anything while you are working.
Remove the Old Water Heater From the Mount
Once the gas is turned off, use a wrench to disconnect the water lines from the old heater. You can then remove it from its mounting bracket and set it aside. Be sure to wear gloves and eye protection during this step as there may be build-up inside the tubes.
Drain the Water From the Old Heater
Once it is removed from its mount, use a wrench to disconnect the vent line from your old water heater. If you have a cold storage tank attached to your hot water lines, drain all of that out as well. This will ensure that nothing leaks out while you are working on removing or installing new parts. Do not forget about any other appliances in your home connected to these pipes!
Install Your New Gas Water Heater
To install your new gas water heater, follow these steps:
- Turn off the gas supply at both valves (the main valve and another close by)
- Use a wrench to disconnect the vent line from your old water heater. If you have a cold storage tank attached to your hot water lines, drain all of that out as well. This will ensure that nothing leaks out while you are working on removing or installing new parts. Do not forget about any other appliances in your home connected to these pipes!
- Turn off the gas supply at both valves (the main valve and another close by). Connect all hoses/pipes together with proper fittings (ie: compression nut). Ensure they’re tight so there won’t be any leaks once everything is installed again!
Connect All Hoses/Pipes Together With Proper Fittings
Once you’ve got everything hooked up, turn on the gas supply at both valves. This will start your new heater running and get hot water flowing through all of those pipes again!
Remember: It Is better to Turn it Over to the Professionals
You can install your own gas water heater, but that doesn’t mean you should. If something goes wrong or there are issues with your installation, this could cause serious damage to property as well as severe injuries or death! You may want to consider hiring professionals instead of doing this yourself because they will know exactly what needs to be done. Plus, they’ll probably already have all of the tools necessary for any project like installing an appliance in your home.
For heater installation in Elmhurst, contact Unique Indoor Comfort. And take time to read HVAC Installation Made Simple: How it’s Done.
Call
NoW 847-359-5100